（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| IEC 60094-7:1986 | Magnetic tape sound recording and reproducing systems. Part 7: Cassette for commercial tape records and domestic use | ||||
| IEC 60086-2:1977/AMD4:1981 | Amendment 4 - Primary batteries - Part 2: Specification sheets | ||||
| IEC 60107-6:1989 | Recommended methods of measurement on receivers for television broadcast transmissions. Part 6: Measurements under conditions different from broadcast signal standards | ||||
| IEC 60598-2-8:1981/AMD1:1987 | Amendment 1 - Luminaires - Part 2-8: Particular requirements - Handlamps | ||||
| IEC 60749-10:2002/COR1:2003 | Corrigendum 1 - Semiconductor devices - Mechanical and climatic test methods - Part 10: Mechanical shock | ||||
| IEC 60455-3-2:1987 | Specification for solventless polymerisable resinous compounds used for electrical insulation. Part 3: Specifications for individual materials. Sheet 2: Quartz filled epoxy resinous compounds | ||||
| CISPR 16-1-3:2004/COR1:2006 | Corrigendum 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-3: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Disturbance power | ||||
| IEC 60335-2-13:2002/AMD2:2008 | Amendment 2 - Household and similar electrical appliances - Safety - Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances | ||||
| IEC 60335-2-13:1993/AMD2:1998 | Amendment 2 - Safety of household and similar electrical appliances - Part 2: Particular requirements for deep fat fryers, frying pans and similar appliances | ||||
| IEC 60335-2-23:2003+AMD1:2008+AMD2:2012 CSV | Household and similar electrical appliances - Safety - Part 2-23: Particular requirements for appliances for skin or hair care | ||||
| IEC 60335-2-28:1987 | Safety of household and similar electrical appliances - Part 2: Particular requirements for sewing machines | ||||
| IEC 60245-2:1980/AMD1:1985 | Amendment 1 - Rubber insulated cables of rated voltages up to and including 450/750 V - Part 2: Test methods | ||||
| IEC 61086-2:1992 | Specification for coatings for loaded printed wire boards (conformal coatings) - Part 2: Methods of test | ||||
| IEC 60464-2:1974 | Specification for insulating varnishes containing solvent. Part 2: Test methods | ||||
| IEC 60684-3-214:2001 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 214: Heat-shrinkable, polyolefin sleeving, not flame retarded, shrink ratio 3:1 - Thick and medium wall | ||||
| IEC 60684-3-214:2005 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 214: Heat-shrinkable, polyolefin sleeving, not flame retarded, shrink ratio 3:1 - Thick and medium wall | ||||
| IEC 60095-1:1980 | Lead-acid starter batteries - Part 1: General requirements and methods of test | ||||
| IEC 60335-2-36:2002+AMD1:2004+AMD2:2008 CSV | Household and similar electrical appliances - Safety - Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements | ||||
| IEC 60454-1:1974 | Specifications for pressure-sensitive adhesive tapes for electrical purposes - Part 1: General requirements | ||||
| IEC 60183:1965 | Guide to the selection of high-voltage cables | ||||
| IEC 62826:2014 | Surface cleaning appliances - Floor treatment machines with or without traction drive, for commercial use - Methods of measuring the performance | ||||
| IEC 60819-1:1985 | Specification for non-cellulosic papers for electrical purposes - Part 1: Definitions and general requirements | ||||
| IEC 60079-1:2001/COR1:2001 | Corrigendum 1 - Electrical apparatus for explosive gas atmospheres - Part 1: Flameproof enclosures "d" | ||||
| IEC 61061-1:1991 | Specification for non-impregnated, densified laminated wood for electrical purposes - Part 1: Definitions, designation and general requirements | ||||
| IEC 60227-2:1979/AMD2:1995/COR1:1995 | Corrigendum 1 - Amendment 2 - Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 2: Test methods | ||||
| IEC 60092-352:1997/AMD1:1998 | Amendment 1 - Electrical installations in ships - Part 352: Choice and installation of cables for low-voltage power systems | ||||
| IEC 60141-1:1976/AMD1:1990 | Amendment 1 - Tests on oil-filled and gas-pressure cables and their accessories - Part 1: Oil-filled, paper-insulated, metal-sheathed cables and accessories for alternating voltages up to and including 400 kV | ||||
| IEC 60335-2-37:1994/AMD2:1998 | Amendment 2 - Safety of household and similar electrical appliances - Part 2-37: Particular requirements for commercial electric deep fat fryers | ||||
| IEC 60998-2-3:1991 | Connecting devices for low-voltage circuits for household and similar purposes - Part 2-3: Particular requirements for connecting devices as separate entities with insulation piercing clamping units | ||||
| IEC 60884-1:1994/AMD2:1995 | Amendment 2 - Plugs and socket-outlets for household and similar purposes - Part 1: General requirements | ||||
| IEC 60335-2-38:1994 | Safety of household and similar electrical appliances - Part 2: Particular requirements for commercial electric griddles and griddle grills | ||||
| IEC 60398:1999 | Industrial electroheating installations - General test methods | ||||
| IEC 60079-0:1998+AMD1:2000 CSV | Electrical apparatus for explosive gas atmospheres - Part 0: General requirements | ||||
| IEC 60952-1:2004 | Aircraft batteries - Part 1: General test requirements and performance levels | ||||
| IEC 60519-2:1992 | Safety in electroheat installations - Part 2: Particular requirements for resistance heating equipment | ||||
| IEC 60079-0:1998 | Electrical apparatus for explosive gas atmospheres - Part 0: General requirements | ||||
| IEC 60519-2:1975 | Safety in electro-heat installations - Part 2: Particular requirements for resistance heating equipment | ||||
| IEC 60519-3:1988 | Safety in electroheat installations - Part 3: Particular requirements for induction and conduction heating and induction melting installations | ||||
| IEC 60519-4:1995+AMD1:2000 CSV | Safety in electroheat installations - Part 4: Particular requirements for arc furnace installations | ||||
| IEC 60703:1981 | Test methods for electroheating installations with electron guns | ||||
| IEC 60335-2-39:2002 | Household and similar electrical appliances - Safety - Part 2-39: Particular requirements for commercial electric multi-purpose cooking pans | ||||
| IEC 60335-2-50:1989 | Safety of household and similar electrical appliances - Part 2: Particular requirements for commercial electric bains-marie. | ||||
| IEC 61308:1994 | High-frequency dielectric heating installations - Test methods for the determination of power output | ||||
| IEC 60079-7:1969 | Electrical apparatus for explosive gas atmospheres - Part 7: Construction and test of electrical apparatus, type of protection "e" | ||||
| IEC 60118-2:1983/AMD2:1997 | Amendment 2 - Hearing aids. Part 2: Hearing aids with automatic gain control circuits | ||||
| IEC 60079-7:1990+AMD1:1991+AMD2:1993 CSV | Electrical apparatus for explosive gas atmospheres - Part 7: Increased safety 'e'. Consolidated edition comprising amendments 1(1991) and 2 (1993) | ||||
| IEC 60335-2-48:1988/AMD1:1990 | Amendment 1 - Safety of household and similar electrical appliances - Part 2-48: Particular requirements for commercial electric grillers and toasters | ||||
| IEC 60118-7:1983 | Hearing aids. Part 7: Measurement of performance characteristics of hearing aids for quality inspection for delivery purposes | ||||
| IEC 60118-2:1983 | Hearing aids. Part 2: Hearing aids with automatic gain control circuits | ||||
| IEC 60079-18:2009 | Explosive atmospheres - Part 18: Equipment protection by encapsulation "m" |
若您对上表中数据有任何疑问，请与网站联系。
