（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| IEC 60335-2-41:1984 | Safety of household and similar electrical appliances. Part 2: Particular requirements for electric pumps for liquids having a temperature not exceeding 35§C. | ||||
| IEC 60942:1997 | Electroacoustics - Sound calibrators | ||||
| IEC 60335-2-42:1994 | Safety of household and similar electrical appliances - Part 2: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens | ||||
| IEC 60335-2-44:1997 | Safety of household and similar electrical appliances - Part 2: Particular requirements for ironers | ||||
| IEC 60335-2-44:1987 | Safety of household and similar electrical appliances. Part 2: Particular requirements for electric ironers | ||||
| IEC 61672-3:2006 | Electroacoustics - Sound level meters - Part 3: Periodic tests | ||||
| IEC 60127-5:1988 | Miniature fuses - Part 5: Guidelines for quality assessment of miniature fuse-links | ||||
| IEC 60691:2002 | Thermal-links - Requirements and application guide | ||||
| IEC 60691:1993+AMD1:1995+AMD2:2000 CSV | Thermal-links - Requirements and application guide | ||||
| IEC 60432-1:1993/AMD2:1997 | Amendment 2 - Safety specifications for incandescent lamps - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes | ||||
| IEC 60143-3:1998 | Series capacitors for power systems - Part 3: Internal fuses | ||||
| IEC 60674-3-1:1998/AMD1:2011 | Amendment 1 - Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors | ||||
| IEC 60155:1963/AMD1:1965 | Amendment 1 - Glow-starters for tubular fluorescent lamps | ||||
| IEC TS 61231:1999 | International lamp coding system (ILCOS) | ||||
| IEC 60947-3:2008/AMD1:2012 | Amendment 1 - Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units | ||||
| IEC 60947-2:2016 | Low-voltage switchgear and controlgear - Part 2: Circuit-breakers | ||||
| IEC 61580-7:1996 | Methods of measurement for waveguides - Part 7: Graphical method for the determination of waveguide performance | ||||
| ISO/IEC 14476-1:2002 | Information technology -- Enhanced communications transport protocol: Specification of simplex multicast transport | ||||
| IEC 61010-2-011:2016 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-011: Particular requirements for refrigerating equipment | ||||
| IEC 60803:1984 | Recommended dimensions for hexagonal and square crimping-die cavities, indentors, ganges, outer conductor crimp sleeves and centre contact crimp barrels for R.F. cables and connectors | ||||
| IEC 61158-6-12:2010 | Industrial communication networks - Fieldbus specifications - Part 6-12: Application layer protocol specification - Type 12 elements | ||||
| IEC 60598-2-13:2006/AMD1:2011 | Amendment 1 - Luminaires - Part 2-13: Particular requirements - Ground recessed luminaires | ||||
| IEC 60775:1983 | Real-time BASIC for CAMAC | ||||
| IEC 60050-726:1982 | International Electrotechnical Vocabulary. Transmission lines and waveguides | ||||
| IEC 62040-1:2017 PRV | Uninterruptible power systems (UPS) - Part 1: Safety requirements | ||||
| IEC 60819-1:1995/AMD1:1996 | Amendment 1 - Non-cellulosic papers for electrical purposes - Part 1: Definitions and general requirements | ||||
| IEC TR 61912-2:2009 | Low-voltage switchgear and controlgear - Over-current protective devices - Part 2: Selectivity under over-current conditions | ||||
| IEC 60731:1997 | Medical electrical equipment - Dosimeters with ionization chambers as used in radiotherapy | ||||
| ISO/IEC 14598-6:2001 | Software engineering -- Product evaluation -- Part 6: Documentation of evaluation modules | ||||
| IEC 60169-9:1978/AMD1:1996 | Amendment 1 - Radio-frequency connectors. Part 9: R.F. coaxial connectors with inner diameter of outer conductor 3 mm (0.12 in) with screw coupling - Characteristic impedance 50 ohms (Type SMC) | ||||
| IEC 60169-13:1976/AMD1:1996 | Amendment 1 - Radio-frequency connectors - Part 13: R.F. coaxial connectors with inner diameter of outer conductor 5.6 mm (0.22 in) - Characteristic impedance 75 ohms (Type 1.6/5.6) - Characteristic impedance 50 ohms (Type 1.8/5.6) with similar mating dimensions | ||||
| IEC 62899-402-1:2017 | Printed electronics - Part 402-1: Printability - Measurement of qualities - Pattern width | ||||
| IEC 60947-5-1:1990/AMD1:1994 | Amendment 1 - Low-voltage switchgear and controlgear. Part 5: Control circuit devices and switching elements - Section One: Electromechanical control circuit devices | ||||
| IEC 61660-1:1997/COR2:2000 | Corrigendum 2 - Short-circuit currents in d.c. auxiliary installations in power plants and substations - Part 1: Calculation of short-circuit currents | ||||
| IEC 60364-5-55:2001 | Electrical installations of buildings - Part 5-55: Selection and erection of electrical equipment - Other equipment | ||||
| IEC 61326-1:2005/COR1:2008 | Corrigendum 1 - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements | ||||
| IEC 60947-4-3:1999+AMD1:2006+AMD2:2011 CSV | Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads | ||||
| IEC 60626-3:1996/AMD1:1999 | Amendment 1 - Combined flexible materials for electrical insulation - Part 3: Specifications for individual materials | ||||
| IEC 60601-2-22:2007/AMD1:2012 | Amendment 1 - Medical electrical equipment - Part 2-22: Particular requirements for basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment | ||||
| IEC 60999-1:1990 | Connecting devices - Safety requirements for screw-type and screwless-type clamping units for electrical copper conductors - Part 1: General requirements and particular requirements for conductors from 0,5 mm2 up to 35 mm2 (included) | ||||
| IEC 60825-2:2004/AMD1:2006 | Amendment 1 - Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS) | ||||
| IEC TR 60825-8:2006 | Safety of laser products - Part 8: Guidelines for the safe use of laser beams on humans | ||||
| IEC TR 61000-2-5:2017 | Electromagnetic compatibility (EMC) - Part 2-5: Environment - Description and classification of electromagnetic environments | ||||
| IEC 60364-7-717:2001 | Electrical installations of buildings - Part 7-717: Requirements for special installations or locations - Mobile or transportable units | ||||
| IEC 60947-1:1999+AMD1:2000+AMD2:2001 CSV/COR1:2002 | Corrigendum 1 - Low-voltage switchgear and controlgear - Part 1: General rules | ||||
| IEC 61508-3:1998/COR1:1999 | Corrigendum 1 - Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements | ||||
| IEC 61000-4-17:1999/AMD1:2001 | Amendment 1 - Electromagnetic compatibility (EMC) - Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test | ||||
| IEC 60494-1:2002 | Railway applications - Rolling stock - Pantographs - Characteristics and tests - Part 1: Pantographs for mainline vehicles | ||||
| IEC 61000-4-3:2006/ISH1:2008 | Interpretation sheet 1 - Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test | ||||
| IEC 61478:2001/AMD1:2003 | Amendment 1 - Live working - Ladders of insulating material |
若您对上表中数据有任何疑问，请与网站联系。
