（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| IEC 60335-2-84:2002/COR1:2003 | Corrigendum 1 - Household and similar electrical appliances - Safety - Part 2-84: Particular requirements for toilets | ||||
| IEC 61991:2000 | Railway applications - Rolling stock - Protective provisions against electrical hazards | ||||
| IEC 60086-3:1965/AMD1:1967 | Amendment 1 - Primary cells and batteries - Part 3: Terminals | ||||
| IEC 60191-2:1966/AMD19:2012 | Amendment 19 - Mechanical standardization of semiconductor devices - Part 2: Dimensions | ||||
| IEC 60826:2017 | Design criteria of overhead transmission lines | ||||
| IEC 60749-2:2002/COR1:2003 | Corrigendum 1 - Semiconductor devices - Mechanical and climatic test methods - Part 2: Low air pressure | ||||
| IEC 61010-031:2015 | Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test | ||||
| IEC 61755-3-5:2006 | Fibre optic connector optical interfaces - Part 3-5: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre | ||||
| IEC 60034-1:2004 | Rotating electrical machines - Part 1: Rating and performance | ||||
| IEC 60081:1984/AMD4:1993 | Amendment 4 - Tubular fluorescent lamps for general lighting service | ||||
| IEC 60034-9:1990 | Rotating electrical machines. Part 9: Noise limits. | ||||
| IEC TR 62051-1:2004/COR1:2005 | Corrigendum 1 - Electricity metering - Data exchange for meter reading, tariff and load control - Glossary of terms - Part 1: Terms related to data exchange with metering equipment using DLMS/COSEM | ||||
| IEC 60067A:1967 | First supplement - Dimensions of electronic tubes and valves | ||||
| IEC 60335-2-25:2002/AMD1:2005 | Amendment 1 - Household and similar electrical appliances - Safety - Part 2-25: Particular requirements for microwave ovens, including combination microwave ovens | ||||
| IEC 60335-2-25:2002 | Household and similar electrical appliances - Safety - Part 2-25: Particular requirements for microwave ovens, including combination microwave ovens | ||||
| IEC 60050-826:1982 | International Electrotechnical Vocabulary. Electrical installations of buildings | ||||
| IEC 60794-1-1:2001 | Optical fibre cables - Part 1-1: Generic specification - General | ||||
| IEC 60904-2:1989/AMD1:1998 | Amendment 1 - Photovoltaic devices. Part 2: Requirements for reference solar cells | ||||
| IEC 60268-1:1985/AMD2:1988 | Amendment 2 - Sound system equipment. Part 1: General | ||||
| IEC 60335-1:1970 | Safety of household and similar electrical appliances - Part 1: General requirements | ||||
| IEC TR 61967-1-1:2015 | Integrated circuits - Measurement of electromagnetic emissions - Part 1-1: General conditions and definitions - Near-field scan data exchange format | ||||
| IEC 60674-1:1980 | Specification for plastic films for electrical purposes. Part 1: Definitions and general requirements | ||||
| IEC 60674-2:2016 | Specification for plastic films for electrical purposes - Part 2: Methods of test | ||||
| IEC 61156-7-2:2003/COR1:2003 | Corrigendum 1 - Multicore and symmetrical pair/quad cables for digital communications - Part 7-2: Symmetrical pair cables with transmission characteristics up to 1 200 MHz - Quality assessment procedure - Sectional specification for digital and analog communication cables | ||||
| ISO 16315:2016 | Small craft - Electric propulsion system | ||||
| IEC 60457-5:1984 | Rigid precision coaxial and their associated precision connectors. Part 5: 50 ohms 3.5 mm rigid precision coaxial line with provision for mounting connectors | ||||
| IEC 60944:1988 | Guide for the maintenance of silicone transformer liquids | ||||
| IEC 60904:2016 SER | Photovoltaic devices - ALL PARTS | ||||
| IEC 61196-10:2014 | Coaxial communication cables - Part 10: Sectional specification for semi-rigid cables with polytetrafluoroethylene (PTFE) dielectric | ||||
| IEC 60169-10:1983 | Radio-frequency connectors. Part 10: R.F. coaxial connectors with inner diameter of outer conductor 3 mm (0.12 in) with snap-on coupling - Characteristic impedance 50 ohms (Type SMB) | ||||
| IEC 60598-2-20:1982/AMD1:1987 | Amendment 1 - Luminaires - Part 2: Particular requirements - Lighting chains | ||||
| IEC 61076-1:2006 | Connectors for electronic equipment - Product requirements - Part 1: Generic specification | ||||
| IEC 60746-4:1992 | Expression of performance of electrochemical analyzers - Part 4: Dissolved oxygen in water measured by membrane covered amperometric sensors | ||||
| IEC 62788-1-5:2016 | Measurement procedures for materials used in photovoltaic modules - Part 1-5: Encapsulants - Measurement of change in linear dimensions of sheet encapsulation material resulting from applied thermal conditions | ||||
| IEC 61196-10:2014/COR1:2016 | Corrigendum 1 - Coaxial communication cables - Part 10: Sectional specification for semi-rigid cables with polytetrafluoroethylene (PTFE) dielectric | ||||
| IEC 61076-2-106:2011 | Connectors for electronic equipment - Product requirements - Part 2-106: Circular connectors - Detail specification for connectors M 16 x 0,75 with screw-locking and degree of protection IP40 or IP65/67 | ||||
| IEC 60746-2:2003/COR1:2003 | Corrigendum 1 - Expression of performance of electrochemical analyzers - Part 2: pH value | ||||
| IEC 62317-1:2007 | Ferrite cores - Dimensions - Part 1: General specification | ||||
| IEC 60079-11:2011/ISH2:2016 | Interpretation sheet 2 - Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" | ||||
| IEC 60730-2-13:2006 | Automatic electrical controls for household and similar use - Part 2-13: Particular requirements for humidity sensing controls | ||||
| IEC 60188:1974/AMD2:1979 | Amendment 2 - High-pressure mercury vapour lamps | ||||
| IEC 60086-4:2000 | Primary batteries - Part 4: Safety of lithium batteries | ||||
| IEC 60529:1989 | Degrees of protection provided by enclosures (IP Code) | ||||
| IEC 60730-1:2013/AMD1:2015 | Amendment 1 - Automatic electrical controls - Part 1: General requirements | ||||
| IEC 60825-4:2006/AMD2:2011 | Amendment 2 - Safety of laser products - Part 4: Laser guards | ||||
| IEC 60702-2:2002/AMD1:2015 | Amendment 1 - Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 2: Terminations | ||||
| IEC 60269-3:2010/AMD1:2013/COR2:2013 | Corrigendum 2 to Amendment 1 - Low-voltage fuses - Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household or similar applications) - Examples of standardized systems of fuses A to F | ||||
| IEC 60079-11:2011/ISH3:2016 | Intrepretation sheet 3 - Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" | ||||
| IEC 61280-2-3:2009 | Fibre optic communication subsystem tets procedures - Part 2-3: Digital systems - Jitter and wander measurements | ||||
| IEC 60269-2:2013/AMD1:2016 | Amendment 1 - Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K |
若您对上表中数据有任何疑问，请与网站联系。
