（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| IEC 60850:2007 | Railway applications - Supply voltages of traction systems | ||||
| IEC 60850:1988 | Supply voltages of traction systems | ||||
| IEC 60068-2-60:1989 | Environmental testing - Part 2: Tests - Test Ke: Corrosion tests in artificial atmosphere at very low concentration of polluting gas(es) | ||||
| IEC 60721-3-1:1987/AMD2:1993 | Amendment 2 - Classification of environmental conditions. Part 3: Classification of groups of environmental parameters and their severities. Storage. | ||||
| IEC 60064:1987 | Tungsten filament lamps for domestic and similar general lighting purposes | ||||
| IEC 62040-1:2008/COR1:2008 | Corrigendum 1 - Uninterruptible power systems (UPS) - Part 1: General and safety requirements for UPS | ||||
| IEC 62040-1:2008+AMD1:2013 CSV | Uninterruptible power systems (UPS) - Part 1: General and safety requirements for UPS | ||||
| IEC 60064:1987/AMD1:1988 | Amendment 1 - Tungsten filament lamps for domestic and similar general lighting purposes | ||||
| IEC 61628-2:1998/AMD1:2007 | Amendment 1 - Corrugated pressboard and presspaper for electrical purposes - Part 2: Methods of test | ||||
| IEC 60400:1990/AMD1:1993 | Amendment 1 - Lampholders for tubular fluorescent lamps and starterholders. | ||||
| IEC 60998-2-1:2002 | Connecting devices for low-voltage circuits for household and similar purposes - Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units | ||||
| IEC 60645-3:2007 | Electroacoustics - Audiometric equipment - Part 3: Test signals of short duration | ||||
| IEC 60067:1954 CSV | Dimensions of electronic tubes and valves | ||||
| IEC 60107-4:1988 | Recommended methods of measurement on receivers for television broadcast transmissions. Part 4: Electrical measurements on multichannel sound television receivers using the two-carrier FM-system | ||||
| IEC 60068-2-10:1988 | Basic environmental testing procedures - Part 2-10: Tests - Test J and guidance: Mould growth | ||||
| IEC 60400:1990/AMD1:1993/COR1:1993 | Corrigendum 1 - Amendment 1 - Lampholders for tubular fluorescent lamps and starterholders | ||||
| IEC 60068-2-7:1968 | Basic environmental testing procedures for electronic components and electronic equipment - Part 2: Tests - Test Ga: Acceleration, steady state | ||||
| IEC 60747-16-3:2002/AMD1:2009 | Amendment 1 - Semiconductor devices - Part 16-3: Microwave integrated circuits - Frequency converters | ||||
| IEC 60068-1:1978 | Basic environmental testing procedures - Part 1: General | ||||
| IEC 60730-2-8:2000/AMD2:2015 | Amendment 2 - Automatic electrical controls for household and similar use - Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements | ||||
| IEC 60335-2-79:1995/AMD1:2000 | Amendment 1 - Safety of household and similar electrical appliances - Part 2-79: Particular requirements for high pressure cleaners and steam cleaners, for industrial and commercial use | ||||
| IEC 62148-2:2003/COR1:2003 | Corrigendum 1 - Fibre optic active components and devices - Package and interface standards - Part 2: SFF MT-RJ 10-pin transceivers | ||||
| IEC 61535:2009+AMD1:2012 CSV | Installation couplers intended for permanent connection in fixedinstallations | ||||
| IEC 61535:2009/AMD1:2012 | Amendment 1 - Installation couplers intended for permanent connection in fixed installations | ||||
| CISPR 16:1987 | CISPR specification for radio interference measuring apparatus and measurement methods | ||||
| IEC 62343-1-2:2007 | Dynamic modules - Part 1-2: Performance standards - Dynamic chromatic dispersion compensator with pigtails for use in controlled environments (Category C) | ||||
| IEC TS 62735-2:2016 | Direct current (DC) plugs and socket-outlets for information and communication technology (ICT) equipment installed in data centres and telecom central offices - Part 2: Plug and socket-outlet system for 5,2 kW | ||||
| IEC 60068-2-21:1983/AMD2:1991 | Amendment 2 - Environmental testing. Part 2: Tests. Test U: Robustness of terminations and integral mounting devices | ||||
| IEC 60947-2:1989/AMD2:1993 | Amendment 2 - Low-voltage switchgear and controlgear - Part 2: Circuit-breakers | ||||
| IEC 60064:1973/AMD1:1978 | Amendment 1 - Tungsten filament lamps for general service | ||||
| IEC 61400-11:2002/AMD1:2006 | Amendment 1 - Wind turbine generator systems - Part 11: Acoustic noise measurement techniques | ||||
| IEC TR 60695-1-21:2008 | Fire hazard testing - Part 1-21: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - Summary and relevance of test methods | ||||
| IEC 61400-25-2:2006 | Wind turbines - Part 25-2: Communications for monitoring and control of wind power plants - Information models | ||||
| IEC TS 60695-7-3:2004 | Fire hazard testing - Part 7-3: Toxicity of fire effluent - Use and interpretation of test results | ||||
| IEC 60695-8-1:2001 | Fire hazard testing - Part 8-1: Heat release - General guidance | ||||
| IEC 60695-11-20:1999/AMD1:2003 | Amendment 1 - Fire hazard testing - Part 11-20: Test flames - 500 W flame test methods | ||||
| IEC 60356:1971 | Dimensions for commutators and slip-rings | ||||
| IEC 60068-2-69:1995 | Environmental testing - Part 2: Tests - Test Te: Solderability testing of electronic components for surface mount technology by the wetting balance method | ||||
| IEC 61189-3:1997+AMD1:1999 CSV | Test methods for electrical materials, interconnection structures and assemblies - Part 3: Test methods for interconnection structures (printed boards) | ||||
| IEC 61760-1:2006 | Surface mounting technology - Part 1: Standard method for the specification of surface mounting components (SMDs) | ||||
| IEC 60155:1993/AMD1:1995 | Amendment 1 - Glow-starters for fluorescent lamps | ||||
| IEC 62052-21:2004/AMD1:2016 | Amendment 1 - Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 21: Tariff and load control equipment | ||||
| IEC 62317-13:2015 | Ferrite cores - Dimensions - Part 13: PQ-cores for use in power supply applications | ||||
| IEC 62271-100:2001/AMD2:2006 | Amendment 2 - High-voltage switchgear and controlgear - Part 100: High-voltage alternating-current circuit-breakers | ||||
| IEC 62271-102:2001/COR2:2003 | Corrigendum 2 - High-voltage switchgear and controlgear - Part 102: Alternating current disconnectors and earthing switches | ||||
| IEC 60332-3-22:2000+AMD1:2008 CSV | Tests on electric and optical fibre cables under fire conditions - Part 3-22: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A | ||||
| IEC 61547:2009/COR1:2010 | Corrigendum 1 - Equipment for general lighting purposes - EMC immunity requirements | ||||
| IEC 60191-2:1966/AMD10:2004 | Amendment 10 - Mechanical standardization of semiconductor devices - Part 2: Dimensions | ||||
| IEC 60335-2-76:2002/AMD1:2006 | Amendment 1 - Household and similar electrical appliances - Safety - Part 2-76: Particular requirements for electric fence energizers | ||||
| IEC 60335-2-55:2002/AMD1:2008 | Amendment 1 - Household and similar electrical appliances - Safety - Part 2-55: Particular requirements for electrical appliances for use with aquariums and garden ponds |
若您对上表中数据有任何疑问，请与网站联系。
