（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| IEC 61967-5:2003 | Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz - Part 5: Measurement of conducted emissions - Workbench Faraday Cage method | ||||
| IEC 62047-26:2016 | Semiconductor devices - Micro-electromechanical devices - Part 26: Description and measurement methods for micro trench and needle structures | ||||
| IEC 62047-27:2017 | Semiconductor devices - Micro-electromechanical devices - Part 27: Bond strength test for glass frit bonded structures using micro-chevron-tests (MCT) | ||||
| IEC 62047-28:2017 | Semiconductor devices - Micro-electromechanical devices - Part 28: Performance testing method of vibration-driven MEMS electret energy harvesting devices | ||||
| IEC 60748-20:1988 | Semiconductor devices. Integrated circuits. Part 20: Generic specification for film integrated circuits and hybrid film integrated circuits | ||||
| IEC 60748-11-1:1992 | Semiconductor devices - Integrated circuits - Part 11-1: Internal visual examination for semiconductor integrated circuits excluding hybrid circuits | ||||
| IEC 60748-22:1997 | Semiconductor devices - Integrated circuits - Part 22: Sectional specification for film integrated circuits and hybrid film integrated circuits on the basis of the capability approval procedures | ||||
| IEC 60748-23-2:2002 | Semiconductor devices - Integrated circuits - Part 23-2: Hybrid integrated circuits and film structures - Manufacturing line certification - Internal visual inspection and special tests | ||||
| IEC 60748-23-3:2002 | Semiconductor devices - Integrated circuits - Part 23-3: Hybrid integrated circuits and film structures - Manufacturing line certification - Manufacturers' self-audit checklist and report | ||||
| IEC 60748-23-1:2002 | Semiconductor devices - Integrated circuits - Part 23-1: Hybrid integrated circuits and film structures - Manufacturing line certification - Generic specification | ||||
| IEC 61943:1999 | Integrated circuits - Manufacturing line approval application guideline | ||||
| IEC 61739:1996 | Integrated circuits - Part 1: Procedures for manufacturing line approval and quality management | ||||
| IEC TS 61945:2000 | Interated circuits - Manufacturing line approval - Methodology for technology and failure analysis | ||||
| IEC 60384-15-3:1984/AMD1:1992 | Amendment 1 - Fixed capacitors for use in electronic equipment. Part 15: Blank detail specification: Fixed tantalum capacitors with solid electrolyte and porous anode. Assessment level E | ||||
| IEC TR 61967-4-1:2005 | Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz - Part 4-1: Measurement of conducted emissions - 1 Ω/150 Ω direct coupling method - Application guidance to IEC 61967-4 | ||||
| IEC 61967-4:2002 | Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz - Part 4: Measurement of conducted emissions, 1 ohm/150 ohm direct coupling method | ||||
| IEC 61967-6:2002+AMD1:2008 CSV | Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz - Part 6: Measurement of conducted emissions - Magnetic probe method | ||||
| IEC 61967-4:2002+AMD1:2006 CSV | Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz - Part 4: Measurement of conducted emissions - 1 Ω/150 Ω direct coupling method | ||||
| IEC 62132-3:2007 | Integrated circuits - Measurement of electromagnetic immunity, 150 kHz to 1 GHz - Part 3: Bulk current injection (BCI) method | ||||
| IEC 61967-6:2002 | Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz - Part 6: Measurement of conducted emissions - Magnetic probe method | ||||
| IEC 62433-2:2017 | EMC IC modelling - Part 2: Models of integrated circuits for EMI behavioural simulation - Conducted emissions modelling (ICEM-CE) | ||||
| IEC 62433-4:2016 | EMC IC modelling - Part 4: Models of integrated circuits for RF immunity behavioural simulation - Conducted immunity modelling (ICIM-CI) | ||||
| IEC 62433-3:2017 | EMC IC modelling - Part 3: Models of integrated circuits for EMI behavioural simulation - Radiated emissions modelling (ICEM-RE) | ||||
| IEC 60761-4:2002 | Equipment for continuous monitoring of radioactivity in gaseous effluents - Part 4: Specific requirements for radioactive iodine monitors | ||||
| IEC 60227-7:1995+AMD1:2003 CSV | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 7: Flexible cables screened and unscreened with two or more conductors | ||||
| IEC 61169-29:2005 | Radio-frequency connectors - Part 29: Sectional specification - Miniature radio frequency coaxial connectors model screw, snap-on, push-pull or quick-lock, slide-in (rack and panel applications) - Characteristic impedance 50 Ω (type 1,0/2,3) - 50 Ω and 75 Ω applications | ||||
| IEC 61169-50:2014 | Radio-frequency connectors - Part 50: Sectional specification for RF coaxial connectors with inner diameter of outer conductors 4,11 mm with quick lock system - Characteristics impedance 50 Ohm (type QMA) | ||||
| IEC 61169-52:2015 | Radio-frequency connectors - Part 52: Sectional specification for series MMCX RF coaxial connectors | ||||
| IEC 61169-37:2007 | Radio-frequency connectors - Part 37: Sectional specification - STWX8 R.F. connectors | ||||
| IEC 61580-2:1996 | Methods of measurement for waveguides - Part 2: Level of intermodulation products | ||||
| IEC 60227-7:1995 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 7: Flexible cables screened and unscreened with two or more conductors | ||||
| IEC 62656-1:2014 | Standardized product ontology register and transfer by spreadsheets - Part 1: Logical structure for data parcels | ||||
| ISO/IEC SYMBOL:2004 DB | Graphical symbols for use on equipment - 12-month subscription to regularly updated online database comprising all graphical symbols published in IEC 60417 and ISO 7000 Graphical symbols for use on equipment | ||||
| IEC 60050-426:2008/AMD1:2015 | Amendment 1 - International Electrotechnical Vocabulary - Part 426: Equipment for explosive atmospheres | ||||
| IEC 60050-411:1996/AMD1:2007 | Amendment 1 - International Electrotechnical Vocabulary - Part 411: Rotating machinery | ||||
| IEC 60684-1:2003 | Flexible insulating sleeving - Part 1: Definitions and general requirements | ||||
| IEC 60684-3-100:2001 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 100 to 105: Extruded PVC sleeving | ||||
| IEC 60893-3-5:2003+AMD1:2009 CSV | Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins | ||||
| IEC 61061-2:1992 | Specification for non-impregnated, densified laminated wood for electrical purposes - Part 2: Methods of test | ||||
| IEC 62271-212:2016 | High-voltage switchgear and controlgear - Part 212: Compact Equipment Assembly for Distribution Substation (CEADS) | ||||
| IEC 60092-353:2016 | Electrical installations in ships - Part 353: Power cables for rated voltages 1 kV and 3 kV | ||||
| IEC 60227-7:1995/AMD2:2011 | Amendment 2 - Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 7: Flexible cables screened and unscreened with two or more conductors | ||||
| IEC/IEEE 62271-37-013:2015 | High-voltage switchgear and controlgear - Part 37-013: Alternating-current generator circuit-breakers | ||||
| IEC 60095-2:2009 | Lead-acid starter batteries - Part 2: Dimensions of batteries and dimensions and marking of terminals | ||||
| IEC 60254-2:2008 | Lead-acid traction batteries - Part 2: Dimensions of cells and terminals and marking of polarity on cells | ||||
| IEC 60095-4:2008 | Lead-acid starter batteries - Part 4: Dimensions of batteries for heavy vehicles | ||||
| IEC 62271-109:2008/AMD1:2013 | Amendment 1 - High-voltage switchgear and controlgear - Part 109: Alternating-current series capacitor by-pass switches | ||||
| IEC TR 61044:2002 | Opportunity-charging of lead-acid traction batteries | ||||
| IEC 60896-22:2004 | Stationary lead-acid batteries - Part 22: Valve regulated types - Requirements | ||||
| IEC 61429:1995 | Marking of secondary cells and batteries with the international recycling symbol ISO 7000-1135 |
若您对上表中数据有任何疑问，请与网站联系。
